Skip to content
Water, fire, storm and mold calls answered 24/7 across Miami-Dade and Broward(786) 664-2643
New KingstonWater & Restoration · Miami(786) 664-2643Answered 24/7
Soffits, fascia, screens

Wind damage repair for Miami homes

The wind tore soffit panels loose, ripped screens off the patio, bent the fascia and left gaps at the eaves where the next rain will blow straight into the attic.

Worker reinstalling white aluminum soffit panels along the eave of a Miami concrete block home after high wind
Quick answer

Wind damage repair fixes the exterior edges and openings that high wind breaks: soffit and fascia, eave vents, screen panels and screen doors, trim around windows and doors, and gutters pulled off the fascia. The crew also checks the attic and ceilings for rain that blew in through those gaps. Damage to the roof covering goes to a roofer, and we tarp it in the meantime.

High wind works on the edges of a house. It peels soffit panels at the corners, lifts fascia that has rotted behind the paint, pops screens out of their spline and drives rain sideways into any opening. During Wilma in 2005, NWS Miami recorded gusts of 105 mph at Opa-locka, 92 mph at Miami International and 99 mph at Fort Lauderdale.

The damage looks cosmetic from the street, but open soffits let rain soak attic insulation, and missing fascia exposes rafter tails to rot. New Kingston crews close those openings, repair the trim, rescreen what tore and dry anything that got wet inside.

Torn patio screen panel flapping on an aluminum pool enclosure frame behind a Miami home after a storm

What strong gusts do to the edges of a house

Wind pushes on one side of a house and pulls on the others, and that pull is strongest at the corners and eaves. That is why soffit panels usually fail at the corners first, and why one loose piece can unzip a whole run in the next gust.

Fascia problems often start well before the storm. Paint hides soft wood, and when the wind loads it, the board splits or pulls its nails. We replace rotted sections, refasten what is sound and reinstall soffit panels against solid backing.

Screens, screen doors and pool enclosures

Screen panels on patios, pool enclosures and windows take a beating in high wind. Most tears are rescreening jobs: new mesh rolled into the existing frame with fresh spline. Bent frames, broken screen doors and damaged closers are repaired or replaced.

If the aluminum structure of a pool enclosure is bent, twisted or pulled from its footings, that is work for an enclosure contractor and usually a permit. We can take down loose, dangerous screen and secure what is left until they arrive.

Signs to act on

When to call about wind damage repair

  • Soffit panels hanging or goneOpen soffits let wind-driven rain and animals into the attic.
  • Loose or split fasciaFascia that pulled away often had soft wood behind the paint before the storm.
  • Screens torn from their framesPatio, window and pool enclosure screens tear or pop their spline in strong gusts.
  • Gutters pulled awayA gutter hanging off the eave dumps rain against the wall and the slab edge.
  • Insulation at the eavesPink or gray fluff around the soffit vents shows wind blew into the attic.
  • Stains near outside wallsCeiling stains along a room's perimeter often trace back to eave openings.

Rain that blew in through the gaps

Wind damage and water damage usually arrive together. Rain driven through open soffits lands on attic insulation, and wet insulation sitting on drywall leads to stains and sagging, and in Miami humidity, mold within days.

After any wind repair we look in the attic along the eaves and check ceilings near outside walls with a meter. Wet insulation is removed, and ceiling drying and repair follow our ceiling leak repair process.

When the wind also brought down trees or roof tiles

Big wind events tend to drop limbs and whole trees along with the trim. If one hit the house, a tree service removes it and our tree damage crew repairs the structure and the rooms beneath.

Missing shingles or tiles are a roofer's job. We put an emergency tarp over that section so the attic stays dry until they can come, and we photograph the eaves and roof edge for your adjuster.

How the job runs

From your call to a finished room

  1. Walk the exteriorWe look at every side of the house, the eaves and screened areas, and photograph the damage.
  2. Secure loose piecesHanging soffit, fascia and screen are removed or fastened so they cannot fly off.
  3. Close the openingsSoffit gaps and broken eave vents are covered or repaired to keep rain and animals out.
  4. Check attic and ceilingsInsulation and drywall along exterior walls are checked with moisture meters.
  5. Repair trim and screensFascia is replaced or refastened, soffits reinstalled and screens rolled with new mesh.
  6. Dry and finishWet materials inside are dried or replaced, and new trim is primed and painted.

Questions

Wind Damage Repair questions

Is a torn pool screen worth fixing right away?

Yes, if the hole is large or the panel is flapping. Loose screen catches wind and can tear the panels beside it or bend the frame. Small tears can wait a few days, though they let in insects and leaves.

Why did my soffits blow out when the roof looks fine?

Soffits are thin panels held at their edges, and wind pressure at the eaves is high. A roof can come through a storm intact while the soffit underneath pops loose, especially at the corners.

Can rain really get into the attic through soffit vents?

In ordinary rain, very little. In a strong storm with sideways wind, rain is driven through vents and gaps and lands on the insulation along the eaves. Damaged or missing soffit lets in far more.

Can you match my existing soffit and fascia color?

We match profile and color as closely as available materials allow and paint new fascia to match. Older aluminum soffit colors can be hard to find, so on a large repair we may suggest replacing one full side for a uniform look.

Should screen panels come down before a hurricane?

Some enclosure makers recommend removing or cutting certain panels so wind can pass through and the frame is not loaded like a sail. Ask the manufacturer or installer what your structure calls for before cutting anything.

Water, smoke or storm damage right now?

Call (786) 664-2643. A person answers at any hour, asks what happened, and tells you what to do while the crew gets moving.

Call (786) 664-2643 · 24/7